Split-Core Bi-Polar DC Transducer Sensor

Mã : T-VER-971BP-200 | Hãng : ONSET - MỸ

Giá tham khảo : Liên HệVui lòng liên hệ để có giá tốt nhất

Mô tả

Catalogue

Catalogue Xem thêm

Hotline : 0909 861 064
Email : sales@mekongtek.com.vn

Giải pháp...

Overview

Split-Core Bi-Polar DC Transducer sensor that measures up to 200 Amps of DC current in both flow directions.

Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1). When configuring this with an RX3000 system, it requires a analog module (RXMOD-A1).

Note: For measurements larger than 120A the device must be powered by a minimum of 15V to maintain expected accuracy.

View Veris manual for T-VER-971BP-200

Highlighted Features

Measures current flow in both directions which is especially beneficial for Solar PV applications.
Adjustable span range
Small size, split-core for ease of installation

In what environment does this sensor operate?

This sensor operates in an indoor environment.

What measurements does this sensor support?

The T-VER-971BP-200 sensor supports the following measurement: DC Current

The country of origin for this product is the United States. To see the full specifications for this product, please see our product manual found under the documentation tab if available

DC Amperage (bi-polar)

Measurement range: +/- 2 to +/- 200 (via span adjust)

Accuracy (below 100A span): +/- .5 A

Accuracy (above 100A span): +/- .5% full scale

Sensor supply: 12 - 24 DC (15 VDC min. for currents > 120 A), 35 mA no-load to 110 mA at 200 A current

Isolation: 600 VAC rms

Operating temperature range: -30 to 60C (-22 to 140F)

Humidity range: 10 - 90% non-condensing

Response time: 2 sec.

Output: (bi-polar) 4 - 20mA

Dimensions: 3.1x2.8x1.4 in. (79x70x36 mm)

Weight: 5.25 oz.